60661P - relais 8 canaux

The VK248 8-Channel Relay Expansion Box provides an additional eight channels of relay output for a flexible expansion of the ATEN Control System. This allows users to control additional devices such as screen, projector lifts and blinds in environments where more devices are required. With the advantage of an Ethernet-based connection, the expansion box easily connects to the VK2100 Control Box via a LAN connection from a variety of locations across a network.Provides 8 relay channels to expand the ATEN Control SystemUp to eight VK248 expansion boxes can be added to a single VK2100 Control BoxFlexible Deployment: Connects to a VK2100 Control Box via an Ethernet connectionID Switch pairs the VK248 with a controller to instantly configure the network settingsProvides DC power to power an AC relay module or other deviceSupports Power over Ethernet (PoE) or DC power supplyFirmware upgradable through USB or Web interfacePackage Contents:1x VK248 8-Channel Relay Expansion Box1x Mounting Kit9x Terminal Blocks1x User InstructionsInterfacesRelay• 8 normally open relays (8 x 2-pole terminal block)• Contact Rating: Max 24 VDC, 2AEthernet• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0SwitchesController ID1 x 16-segment SwitchExpander ID1 x 8-segment SwitchReset Button1 x Semi-recessed PushbuttonUSB1 x USB Type A (Firmware upgrade only)Power ConsumptionDC5V:2.82W:24BTUEnvironmentalOperating Temperature0 – 50°CStorage Temperature–20 – 60°CHumidity0 - 80% RH, Non-CondensingPowerOutput12 VDC, 300 mAPhysical PropertiesHousingMetalWeight0.65 kg ( 1.43 lb )Dimensions (L x W x H)20.00 x 7.58 x 4.20 cm (7.87 x 2.98 x 1.65 in.)NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.